Secure, Monitor and Control Your Home from Just About Anywhere

It's easy to buy home security equipment on the Internet.

Sponsored by AT&T Digital Life

Programming the devices and making the separate components interact with one another is the real challenge. Even if you’re a successful programmer, it’s still no picnic. And, once the devices are programmed, you still have to master as many as three separate apps to control each system from your smartphone or tablet. You might even have to build your own website to view streaming video from your home.

Then there’s the central station hookup. Some DIYers skip that part. That’s a huge mistake. Because it’s the central station hookup that provides peace of mind from burglary and fire, and connecting to a central station is the only way to qualify for a homeowner’s insurance discount.

When you add up the cost of the equipment, the time and frustration required to install and program the devices and the recurring monthly monitoring fees, you might discover there’s little advantage to doing the job yourself. So check out all the other options before you jump into a DIY installation.

Several national telecommunications companies now offer totally integrated security, energy management and home automation systems. Their systems are professionally installed and monitored by a UL-listed central station. You pay a reasonable one-time installation and equipment fee, and then a competitive monthly monitoring fee. The best part is that most systems utilize a single app to control the separate systems.

However, there are some important differences among the systems. The most important is how the system communicates the security, energy management, and automation signals and commands. An Internet-based system relies on your home’s Internet connection. Since the Internet connection can fail, you must have a reliable backup connection for your system to remain up and running. An Internet-based system can utilize your existing old-fashioned hard-wired phone service as backup. But it can’t use a phone service that’s run through a box connected to your cable or DSL modem, because those don’t work during an Internet outage. If you don’t have a hard-wired phone line or you use a phone device connected to your Internet modem, you’ll need a backup, which could be an add-on cellular backup device. That will boost your monthly monitoring charges a bit. The cellular backup will transmit signals to your central station during an Internet outage, but you may lose control over your energy management and home automation devices until your Internet service is restored.

There’s another option, however. Instead of relying on your Internet connection, the AT&T Digital Life system uses the AT&T mobility cellular network as the primary communications mode. All security, energy management, and home automation signals transmit over the AT&T network. The only time the AT&T system uses your Internet is for video streaming and emergency backup. In the event that your Internet is down, cellular communications will allow you to maintain control of your security, energy and home automation devices.

The next big difference is equipment/software compatibility. Some companies cobble together off-the-shelf hardware and find a controller to run everything. That may work for a while. But a software glitch down the road or an incompatible software update can cause system-wide problems. That’s where things get dicey. Since the installing company didn’t build the system, they’re at the mercy of their suppliers to find a solution. Until they do, you’re out of luck. With your home’s security at stake, that’s not the type of system you want. AT&T Digital Life, on the other hand, is an example of a system that was designed by AT&T from the ground up. They had the controller built to their specifications and designed software and an app to ensure complete compatibility and uniform operation among the individual devices, controller and the AT&T Digital Life app.

Finally, there’s a huge difference between apps. We prefer apps that control all your systems from a single app. They’re user-friendly and easy to customize. They let you pick your own name for each device and set up your own custom notifications. They also allow you to configure automation tasks individually or base them on certain events that you program—like turning on lights after sensing a garage door opening. The AT&T Digital Life app is one that has all those features. In fact, in our opinion, it’s easy to use because it’s intuitive. Some other apps may be harder to navigate and lock you into presets you can’t change. App design is so important that you shouldn’t commit to any company’s system until you’ve actually used their app. If you can’t figure out the app, you’ll never be able to take full advantage of the system’s features, and that defeats the whole purpose of installing a fully featured integrated security, energy, and home automation system.

Note: AT&T Digital Life is available in limited markets. Service restrictions apply; see for details; optional automation packages only available with Smart Security package. See for license information.

Popular Videos