Electric Stove Burner Repair TipsUpdated: Aug. 11, 2022
Electric stove burner repair tips: Simple fixes solve most problems
You might also like: TBD
Step 1: Replace bad electric stove top burners or sockets
Photo 1: Check the stove burner
Test the electric stove top burners by replacing the burner that doesn’t work with one that you know does.
If one of your electric stove top burners isn’t heating, it could be a bad burner, a bad connection in the burner socket or a faulty switch.
To see if the problem is the burner, exchange the burner with one that you know works (Photo 1). If that burner won’t heat, the problem is either the burner socket or the infinite switch. (The burner prongs plug into the burner socket.) Connections in the burner socket can burn out and fail to provide power. If the prongs look burned, inspect the socket. If the socket looks charred or burned, replace it. Photo 2 shows how to replace a burner socket.
CAUTION: Always unplug your electric range before working on it.
Step 2: Replace the switch
Photo 3: Test the switch
Test the switch. Unplug the range and turn on the stove burner. Remove the wire from the H1 terminal. Set the tester to RX-1 and place the probes on the H1 and H2 terminals. Replace the switch if the tester reading doesn’t change.
The knob you turn to control the stove burner temperature slides over the shaft of the infinite switch. If the switch burns out, your burner won’t get power. Test the infinite switch if you know the burner and burner socket are good but the burner still won’t heat. We removed the back panel to access the infinite switch. Your range may be different. With the range unplugged, test the switch with a multimeter set to RX-1 (Photo 3). If the meter reading remains the same, the infinite switch is bad and should be replaced (Photos 3 and 4).
Required Tools for this Stove Burner Replacement Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- 4-in-1 screwdriver