How to Install a Door Sweep

Say goodbye to cold drafts.

Next Project
Time

An hour or less

Complexity

Beginner

Cost

$20-50

Introduction

Keep Old Man Winter out by installing a door sweep.

Tools Required

  • Cordless drill
  • Drill bit set
  • Hacksaw
  • Measuring tape
  • Phillips-head screwdriver
  • Utility knife

Materials Required

  • Door sweep

Project step-by-step (4)

Step 1

Measure for a Door Sweep

  • Measure the width of the front door from inside and mark the length on your new sweep.

door

Step 2

Cut the Door Sweep

  • Cut the metal part of the door sweep with a hacksaw, then cut the flexible flap with sharp scissors or a utility knife.

sweep

Step 3

Position and Mark Holes

  • Position the door sweep with the flexible portion lightly touching the top of the threshold. Then mark the screw positions and drill 3/32-inch pilot holes.

Position

Step 4

Attach the Sweep

  • Push the sweep down against the threshold and drive in the screws. Open and close the door to test the seal. When the seal is right, it can help reduce your heating bills.

Attach