How to Install a New Bathroom Faucet in 8 Steps
Learn how to upgrade your bathroom faucet the DIY way. You can do this.
Our editors and experts handpick every product we feature. We may earn a commission from your purchases.
An hour or less
IntroductionChanging out your faucet may be just what your bathroom needs. Here we walk you through the easy steps to install a new bathroom faucet.
- Adjustable wrench
- Bucket and towels
- Phillips-head screwdriver
- New faucet
Project step-by-step (8)
Turn Off Water
- First, shut off either the hot- and cold-water supply valves at the sink or the main water valve for the whole house.
Remove the Old Faucet
- Not all faucets are secured to the sink the same way. Some have a large locknut from the underside of the sink, while others have a threaded rod with a nut securing it to a mounting plate on the underside of the sink. (See photo.)
- From the underside of the sink, loosen the nut or nuts holding the faucet in place. Now remove the old faucet by pulling it up and away from the sink.
Install Deck Plate
- Convert a three-hole sink to a one-hole sink with a deck plate. (Not all faucets include a deck plate — you may have to purchase one separately.)
- Before installing the deck plate, apply a thin bead of plumber’s putty to the bottom of the plate.
Install the Faucet
- Insert the supply lines and the shank of the faucet through the hole in the deck plate or sink.
- From the underside of the sink assemble in order: 1. Rubber washer, 2. Brass washer, 3. Threaded locknut w/set screws. Hand tighten the threaded locknut.
- Use a screwdriver to tighten the set screws on the locknut. Work your way around the locknut tightening the screws slightly each time until they are snug.
Connect Water Supply
- Install the hot- and cold-water supply lines to the corresponding shut-off valve. Tighten with an adjustable wrench, but only until snug. Do not overtighten.
- Pro tip: If the supply lines are too long, shorten the length by creating a loop in the line.
Turn On the Water
- Turn on hot and cold shut-off valves. Check for leaks near the valves.
- Pro tips: Click here for Expert Tips for Easy Faucet Installation from Family Handyman.