How to Repair a Dim HeadlightUpdated: Aug. 11, 2022
Simply clean the ground connection or replace the bulb to quickly solve the problem
You might also like: TBD
Repair a dim headlight
Clean a ground cable connection
Disassemble the connection, clean it with a wire brush and reassemble it. Coat the parts with dielectric grease to slow down corrosion.
Bulb with brown/gray film
Check the bulb to see if the inside of the glass is covered with a brown/gray film.
If your car has a headlight that puts out about as much light as a flashlight with weak batteries, we’ve got two simple fixes for you.
Most DIYers think they’ve got a bad headlight switch or a bad connection in the power feed. But most dim headlights are caused by a corroded ground wire. Just trace the wiring harness from the back of each headlight assembly and see where it connects to the vehicle body. Clean it as described in the photo.
Another possibility is that as headlight filaments age, they deposit a gray/brown film on the inside of the bulb (See Photo). Over time, that coating can reduce visibility by almost 300 ft. If your headlights aren’t as bright as they used to be, yank one of the bulbs and look for gray or brown residue on the glass. If you find any, replace both bulbs now and get back to seeing more of the road.
Required Tools for this Headlight Repair Project
Have the necessary tools for this DIY project lined up before you start—you’ll save time and frustration.
- Adjustable wrench
- Wire brush
Required Materials for this Headlight Repair Project
Avoid last-minute shopping trips by having all your materials ready ahead of time. Here’s a list.
- Dielectric grease